How to install charging piles in the middle parking space without leaning against the wall

How to install the charging pile in the middle parking space without leaning against the wall? You can choose a vertical charging pile with a protection level of IP54 for installing charging piles in the middle parking spaces that are not against the wall. The ambient temperature must be between -25℃ and +50℃, the vertical inclination of installation does not exceed 5%, and the installation site must not have explosive dangerous media , The surrounding medium does not contain harmful gases and conductive media that can corrode metals and damage insulation.

Safety requirements for charging pile installation:
1. The substation shall be equipped with safety fences, warning signs, safety signals and alarm bells.
2. A warning sign of "Stop, High Voltage Danger" should be hung outside the door of high voltage power distribution room and transformer room or on the safety column of the substation. The warning signs must face the outside of the fence.
3. There should be significant operating instructions on the high-voltage power distribution device. The grounding point of the equipment should be clearly marked.
4. There should be obvious signs of "safe passage" or "safe exit" indoors.

Reminder: The installation of charging piles needs to apply to the property department, because the installation of charging piles requires the cooperation of the property department and the wiring must be changed. Then apply to the local power supply company. After the power supply company approves, you can contact an electrician for installation.