Basement charging pile

The basement charging pile is generally combined with the construction of parking spaces in the parking lot. It is necessary to report to the property center to clarify the installation of parking spaces and the construction plan. After that, you have to go through the relevant procedures at the business hall of the power supply company, and find the relevant construction plan for the car manufacturer or 4S shop to install the basement charging pile.

The installation of charging piles in the basement must comply with relevant standards. In accordance with the requirements of the "Special Planning for Electric Vehicle Charging Infrastructure", the old residential community combines the built parking lots and road parking spaces to actively promote the electrification transformation. For the dedicated fixed parking spaces, the supporting power supply facilities are increased according to the "one meter, one parking space" model. Capacity transformation, gradually transforming or installing charging infrastructure at a rate of no less than 10% of the total parking. The installation of charging piles shall comply with relevant national laws, regulations, technical standards and energy conservation and environmental protection policies.

Pay attention to the following issues in basement charging piles:
1. Set different charging cable lengths according to the distance of the socket. The sockets of each charging pile must be separated by 80~100cm. At the same time, in order to ensure the smooth entry and exit of the charging vehicle, the distance of the power cord and the position of the parking space must be measured to ensure that other vehicles can enter and exit normally.
2. The signal strength needs to be checked, and the specific sockets can be marked in advance to test whether the signal of the underground garage is stable.
3. Since the underground garage cannot be compared with the light on the ground, it is necessary to determine whether the light is sufficient to facilitate people's use.
4. Determine whether there is moisture seepage in the underground garage and the location of the distribution box. Before that, it is necessary to ensure that the charging pile has been correctly connected to the neutral line. At the same time, these operations need to be performed by a professional with an electrician certificate and install the charging pile to ensure safety.