40Kw portable DC EV charger customized Solution

product description

1, with constant current and constant voltage charging function.

2. Two charging modes: BMS charging mode and manual charging mode.

3. The output voltage and current are set by the touch screen, which is suitable for occasions without CAN communication.

4, with protection function, over voltage, output over current, reverse battery connection, insulation detection and communication failure alarm.

5. Install the external operation indicator to display the status of the charging system in real time.

6, equipped with high-voltage DC national standard charging gun, can effectively ensure the safety of charging.

7. Have an open, shareable data service platform and management platform (cloud platform).

8. The charging system ensures normal use in an outdoor environment with IP54 protection.

Hongjiali provides portable, wall-mounted and floor-standing charging piles for customers and charging pile investors, providing customers and investors with a variety of solutions for charging pile investment and revenue. Responding to the national call for energy conservation, environmental protection and green travel, meeting the market requirements for rapid, economic and intelligent operation management of the new energy vehicle industry.

how to use
A. Automatically start charging
1. Turn on the power switch, the display shows the standby state, and then start to finish;
2. As shown in the figure, plug in the charging plug, the Charging Station indicator light is green, when the charging indicator is flashing, it indicates that charging has started;
3. When charging is complete, unplug the cable and insert the cable into the socket or cable hook.

B. The button starts charging
1. Turn on the power switch, the display shows the standby state, and the startup is completed;
2. As shown in the figure, plug in the charging plug, the charging station indicator light is green, press the right button of the charging station, when the button lights up as shown, the charging indicator flashes and flashes, indicating that charging has started;
3. When charging is complete, press the button, pull out the charging cable, insert the cable into the socket or store it on the cable hook.