What is the emergency button of the charging pile?

What does the emergency button of the charging pile do? The function of the emergency button of the charging pile is the switch that can make the equipment emergency stop when a safety accident occurs in the charging pile, so that the emergency stop button can be pressed under special circumstances to stop the charging pile and avoid the danger of electric shock.

The function of the emergency button switch of the charging pile:
1. The emergency button switch is a switch that is activated when you need help in an emergency. It is the master switch used to control the secondary circuit.
2. A button is a commonly used control electrical component. It is often used to turn on or off the `control circuit` (where the current is small) to achieve the purpose of controlling the operation of a motor or other electrical equipment. Common buttons are mainly used as emergency stop button, start button, stop button, combination button (keyboard), jog button, reset button.

The emergency button can also be called the "emergency stop button", referred to as the emergency stop button in the industry. As the name implies, when an emergency occurs, people can quickly press this button to achieve protection measures. It is for the operator to find a problem with the equipment and need to immediately Used during shutdown.

Notes for the use of charging piles:
1. Before charging
1. Check the surrounding environment for inflammable and explosive materials.
2. Check whether the charging pile display status is normal.
3. Check whether the charging gun is intact and whether the charging interface standard matches.
4. Confirm that the charging gun is connected in place.

2. Charging
1. Operate the charging pile correctly according to the instructions for use.
2. Check whether the charging pile display is normal, whether there is current, voltage, etc.
3. It is forbidden to pull out the charging gun during charging.
4. It is forbidden to start the car during charging.

3. After charging
1. Confirm that the charging pile stops working.
2. Pull out the charging gun, arrange the charging gun and put it back into the charging port.
3. Seal the charging port of the electric vehicle.
4. Organize the charging site.

Fourth, charging pile safety
1. When an emergency occurs during charging, please press the emergency button of the charging pile.
2. When the charging pile catches fire, immediately turn off the main power supply. When the fire is in a controllable range, use a carbon dioxide fire extinguisher to extinguish the fire. When the fire becomes uncontrollable, evacuate people immediately.
3. Because the charging pile uses high-voltage electricity, you must wear insulating gloves when charging. It is forbidden to touch the socket of the electric gun and the socket of the vehicle with your hands.