Specification for charging piles in underground garages

The specifications for charging piles in underground garages generally include length measurement of the charging area; distance measurement from parking spaces to ensure that other vehicles can enter and exit normally; clarify the location of the distribution box and confirm the distance of the power cord; clarify whether there is moisture in the underground garage; Whether the light is sufficient; test whether the signal of the underground garage is stable.

The installation of charging piles in underground garages should meet the following requirements:
1. The wall and bracket installed on the charging pile in the underground garage meet the load-bearing requirements, and the charging pile is reliably fixed.
2. The charging pile of the underground garage should be installed perpendicular to the horizontal plane, and the deviation of any direction from the vertical position should not be greater than 5°.
3. The installation height of the charging pile in the underground garage should be easy to operate, and the horizontal centerline of the charging pile man-machine interface operation area should be 1.4m from the ground.
4. The charging pile installed on the ground in the basement should be equipped with an installation base, which should be larger than the outer contour size of the charging pile, and the height should be 1000mm higher than the floor.

Precautions for installation of charging piles in underground garages:
1. When the underground garage charging pile is installed on the side wall of the parking space, the width between the side wall and the parking space should be ≥500mm. The installation location of the underground garage charging pile should be arranged at the front or rear of the car, and should not affect the opening of the car door; underground garage charging When the pile is installed on the rear wall of the parking space, the parking space should be arranged against the wall and the charging facilities should be installed in the center.
2. When there are no civil installation components around the charging parking space, the underground garage charging piles can be hoisted and arranged at the rear of the parking space.
3. The installation method of charging piles for standard column-span underground garages should be combined according to the specific conditions of the parking spaces.