How much does the charging pile cost

How much does the charging pile cost? The price of charging piles is generally determined according to the power and functional configuration of the charging piles. The same power, different configuration functions, the price will be different, so only a rough price reference range can be given. For example, the price of an AC 7kw charging pile is generally around 2,000, and the specific price depends on the configuration function; the price of a DC 30kw charging pile is generally around 20,000, and the specific price is still the same, which needs to be determined according to the configuration function required.

1. Classification of charging piles
1. According to the installation method, charging piles can be divided into floor charging piles and wall-mounted charging piles.
(1) Floor-standing charging piles are suitable for installation in parking spaces not close to the wall.
(2) Wall-mounted charging piles are suitable for installation in parking spaces close to the wall.

2. According to the installation location, charging piles can be divided into public charging piles, special charging piles and self-use charging piles.
(1) Public charging piles are charging piles built in public parking lots (garages) combined with parking spaces to provide public charging services for social vehicles. (2) The special charging pile is the self-owned parking lot (garage) of the construction unit (enterprise), which is used by the internal personnel of the unit (enterprise).
(3) Self-use charging piles are built in personal parking spaces (garages) to provide charging for private users.

Warm reminder: Charging piles are generally combined with the construction of parking spaces in the parking lot (garage). The protection level of charging piles installed outdoors should not be lower than IP54. The protection level of charging piles installed indoors should not be lower than IP32.

3. According to the number of charging ports, charging piles can be divided into one pile with one charging and one pile with multiple charging.

4. According to the charging method, charging piles can be divided into DC charging piles, AC charging piles and AC/DC integrated charging piles.

2. What precautions are needed when installing a charging pile?
1. The battery polarity cannot be reversed, otherwise the smart charger and battery will be damaged. The smart charger should be installed in a special place with good ventilation, dryness, no serious dust, no corrosive gas, and no strong electromagnetic field interference. The cabinet should be grounded reliably (there is a grounding bolt at the lower part of the rear of the cabinet).
2. The smart charger is suitable for indoor and outdoor use, not for vehicle use. Water is strictly prohibited inside the charger.
3. The input power of the smart charger is two-phase 380V±5%, 50HZ, and the input wire cross-section is not less than 62.
4. The output line should be based on the distance, select suitable cables, and the total voltage drop of the line should not exceed 5%.