10KV charging pile

10KV charging piles do not have this voltage level for the current national standard charging piles. The charging range of current charging pile modules is up to 750V, such as the 180KW-360KW four-gun split DC charging of Shenzhen Hongjiali New Energy Co., Ltd. Pile, output voltage 200-750V, ordinary constant output current range 0-594A, constant power output current range 0-900A, input voltage AC380V±20%.

The 180KW-360KW four-gun split DC Charging Pile is mainly suitable for urban dedicated charging stations (buses, taxis, official vehicles, sanitation vehicles, logistics vehicles, etc.), urban public charging stations (private cars, commuter cars, buses), Intercity highway charging stations and other occasions that require DC Fast Charging. Has the following characteristics:

1. Complete safety protection function, with input side overvoltage and undervoltage protection, output side overvoltage and overcurrent protection, insulation monitoring protection, over temperature, short circuit, leakage, lightning protection, battery reverse protection and other protections.
2. Provide man-machine interactive operation; provide DC and AC charging ports.
3. With voice prompt function; with card swiping function.
4. With the function of printing receipts.
5. Real-time communication with BMS to obtain information such as power battery type, cell voltage, remaining capacity, temperature, and alarms.
6. Send control commands and switch signals to the charger, control the start and stop of the charger, and obtain the status information of the charger.
7. It has the connection status judgment and intelligent control function of the charging interface.